
Real-time sensing of environmental variables such as irradiance, temperature and wind speed, together with electrical quantities. Relying on mechanism models of photovoltaic modules, power devices, heat dissipation and power grid, the control parameters, protection thresholds and operating points are dynamically adjusted to form a closed loop. This balances power generation, efficiency, device safety and grid stability under varying environmental conditions.
Complete three-layer closed loop Sensing layer: Collect environmental and status information Sensors acquire irradiance, photovoltaic module temperature, ambient temperature, wind speed and humidity. Meanwhile, DC voltage and current, junction temperature of power devices, grid voltage and frequency are sampled. After filtering and noise reduction, the data is transmitted to the controller. Photovoltaics are inherently nonlinear: the open-circuit voltage decreases as temperature rises; the short-circuit current drops as irradiance falls, and the position of the maximum power point drifts accordingly. This serves as the physical basis for adaptive control.
Decision layer: Calculate reference values using models and adaptive algorithms Adaptive MPPT: The maximum power point voltage is corrected by temperature and irradiance. Variable-step perturb-and-observe, incremental conductance and intelligent algorithms enable faster and more stable tracking of the global maximum power point under rapid irradiance fluctuations and partial shading. Adaptive thermal management: Fan speed and heat dissipation schemes are dynamically adjusted according to junction temperature, ambient temperature and wind speed. Power derating is implemented when necessary to prevent overheating damage to power devices and capacitors. Adaptive protection thresholds: Thresholds for overvoltage, overcurrent, islanding and overheating are no longer fixed. They are reasonably shifted according to environmental conditions to avoid false protection or delayed protection. Adaptive grid connection: Adaptive phase-locking, reactive power support and harmonic suppression are performed during grid fluctuations to comply with grid codes. Some schemes adopt identification, prediction, fuzzy logic or machine learning models to fit the environment–performance mapping and predict operating conditions in advance.
Actuation layer: Regulation of power loops and peripheral equipment The controller outputs PWM duty cycles, modulation frequencies, fan control signals and power commands to drive the front-stage DC/DC and back-stage DC/AC conversion circuits. This changes the operating voltage of the photovoltaic array as well as the active and reactive power output. Sampling is then repeated for continuous closed-loop correction.
Objectives Compared with schemes using fixed parameters, the strategy improves power generation utilization, reduces unnecessary shutdowns, lowers thermal stress on devices, extends service life and satisfies grid interconnection specifications under conditions such as sudden light changes, high temperature, dust and low irradiance.